Published Singapore guides put installed epoxy flooring at roughly S$4 to S$12 per sq ft. Where your job lands in that range depends on the system, the floor’s condition and when the work can be done.
Updated 26 October 2026
In short: Installed epoxy flooring in Singapore typically costs about S$4 to S$12 per sq ft. Thin coatings sit at the low end; self-levelling, metallic and heavy-duty systems at the high end. Removing old tiles adds roughly S$3 to S$8 per sq ft, and screeding about S$1 to S$3.
These are indicative market ranges to help you budget, not a quotation. A site survey is needed for a firm price, because the condition of the concrete changes the cost.
Singapore pricing guides for 2026 put installed epoxy flooring at roughly S$4 to S$12 per sq ft. Thin roller coatings sit at the lower end; thicker self-levelling, decorative and heavy-duty systems sit higher.
| System | Where it sits in the range | Best for |
|---|---|---|
| Epoxy coating (roller-applied) | Lower | Storerooms, garages, light-traffic areas |
| Self-levelling epoxy | Middle | Showrooms, offices, clean areas |
| Anti-slip epoxy | Middle | Kitchens, wet areas, ramps |
| Decorative: metallic or flake | Upper | Retail, homes, feature floors |
| Heavy-duty or mortar epoxy | Upper | Factories, forklift routes |
Using the S$4–S$12 per sq ft range for the epoxy itself, before GST and before any hacking or screeding:
| Area | Indicative epoxy cost |
|---|---|
| 300 sq ft (home kitchen, small shop) | S$1,200–S$3,600, often subject to a minimum charge |
| 1,000 sq ft (showroom, workshop) | S$4,000–S$12,000 |
| 5,000 sq ft (warehouse) | S$20,000–S$60,000 |
Larger areas usually land toward the lower end per sq ft.
Price source: Flooring Cost Singapore (2026). For how we do the work, see epoxy flooring, or compare finishes in epoxy flooring for HDB flats and toilets.
| Space | Usual system | Price position |
|---|---|---|
| Storeroom or garage | Epoxy coating | Lower |
| Office or showroom | Self-levelling epoxy | Middle |
| Commercial kitchen | Anti-slip epoxy or PU system | Middle to upper |
| Retail feature floor | Metallic or flake epoxy | Upper |
| Warehouse forklift route | Heavy-duty or mortar epoxy | Upper |
See resin vs epoxy flooring if you’re unsure which resin type fits your space.
Pricing a kitchen floor? Epoxy flooring for kitchens covers anti-slip finishes and the systems F&B kitchens need.
We handle epoxy flooring across Singapore, with a free site survey and an itemised quotation. See epoxy flooring, or WhatsApp us photos of the unit.
Send photos, the floor plan and your handover date. Site surveys are free and every quotation is itemised.
Can’t see yours? Send it on WhatsApp with a photo of the unit.
Published Singapore guides put installed epoxy at roughly S$4 to S$12 per sq ft, depending on the system and the floor’s condition.
Epoxy is often comparable to or cheaper than tiling for large areas, especially where the existing slab can be prepared without hacking.
With good surface preparation, a commercial epoxy floor commonly lasts several years. Heavy traffic wears it faster; thicker systems last longer.
Typically light foot traffic after about 24 hours and vehicles after about three days, depending on the product.
We’ll reply with an initial estimate and a time for a free site survey.