Home / Epoxy flooring
Seamless, hard-wearing epoxy floors for warehouses, factories, car parks, shops and homes, including removal of old tiles and coatings.
Epoxy is a resin coating bonded to a concrete floor. It forms a seamless, hard-wearing surface that’s easy to clean, which is why it’s common in:
| Type | Best for | Notes |
|---|---|---|
| Epoxy coating (roller-applied) | Light traffic, storerooms, garages | Thinner and lower cost; refreshes worn concrete |
| Self-levelling epoxy | Showrooms, offices, clean areas | Thicker, smooth and glossy finish over an even floor |
| Anti-slip epoxy | Kitchens, wet areas, ramps | Aggregate added to the top coat for grip |
| Heavy-duty or mortar epoxy | Factories, forklift routes | Thickest system for impact and heavy loads |
| Epoxy | Vinyl | Tiles | |
|---|---|---|---|
| Joints | Seamless | Seams between planks or sheets | Grout lines |
| Cleaning | Very easy; resists oil and chemicals | Easy | Grout stains over time |
| Heavy loads and forklifts | Good (heavy-duty systems) | Poor | Tiles can crack |
| Installation time | 2–5 days including curing | 1–3 days | Several days plus setting |
| Best for | Warehouses, car parks, kitchens, showrooms | Offices and homes | Homes and wet areas |
If the floor has tiles, vinyl or a failing coating, it needs to come off first. We handle that floor hacking and preparation in the same job.
Epoxy is priced per sq ft and depends on the system, the floor area, how much preparation the slab needs, and whether work must be done outside operating hours. Send the floor area, photos and how the space is used on WhatsApp, and we will survey the floor and quote.
Send photos, the floor plan and your handover date. Site surveys are free and every quotation is itemised.
Can’t see yours? Send it on WhatsApp with a photo of the unit.
With good preparation, a commercial epoxy floor commonly lasts several years. Heavy forklift traffic wears it faster; thicker systems last longer.
It’s possible in some cases, but tile joints and loose tiles often show through or crack the coating. Removing the tiles first usually gives a better result.
Often yes for smaller areas. Larger areas can be phased so that part of the space stays in use.
A glossy finish can be slippery when wet. An anti-slip top coat is recommended for kitchens, wet areas and ramps.
We’ll reply with an initial estimate and a time for a free site survey.